24 Apr 2008
用於大型家用電器連接器的ARNITE® XG材料
帝斯曼工程塑料推出了一種符合IEC 60335-1要求的無鹵材料ARNITE® XG PBT。該材料專門用於自動電器的連接器。
24 Apr 2008
STANYL® PA46 IN TUMBLE VALVES SUPPORT EFFICIENCY
Stanyl®, a high-performance polyamide 46 (PA46) resin from DSM Engineering Plastics, was chosen for the production of tumble valve bearings for the latest generation of the V6 and V8 engines of a high value german car producer. Tumble valves are an integral part of the manifold, optimizing the air flow in the combustion chamber. It is the first time that such tumble valves have been produced by assembly molding and Stanyl® played an important role in making this possible.
24 Apr 2008
DSM launches Arnitel® XG with halogen free flame retardant
DSM Engineering Plastics launches Arnitel® XG, a zero halogen flame retardant product, for cables insulation in consumer electronics. This innovative Arnitel solution meets the UL VW1 specification which is the standard widely used by this industry. This product tailors to growing needs in the consumer electronics industry for using materials and technologies that are environmentally safer.
24 Apr 2008
DSM Akulon® UltraflowTM, now with improved surface aesthetics
DSM Engineering Plastics have announced the introduction of Akulon® UltraflowTM with added gloss. The new grades will have improved surface finish, even with glass fiber loadings as high as 60%.
24 Apr 2008
DSM Engineering Plastics enhances their wear resistant portfolio for Stanyl®
DSM today announced the launch of a new grade in Stanyl®. Stanyl, a high performance polyamide is used extensively for automotive applications where extreme wear resistance is required. The new grade named Stanyl TW272B6 is a special grade with very high stiffness and outstanding wear resistance suited ideally for taking very high loads during sliding and roller bearing applications.
24 Apr 2008
DSM Engineering Plastics: Products for a greener environment
In response to industry demand for products with a reduced environmental impact, DSM Engineering Plastics has extended its product offerings across its portfolio to include halogen free grades in all its product lines. These products address the needs across a wide range of technical parts for the electrical and electronics industry with a focus not just on a greener material but also delivering the required electrical, mechanical and processing performance.
24 Apr 2008
Stanyl® Super Flow from DSM gets Excellence in Technology Award from Frost & Sullivan
Frost & Sullivan has awarded the European Process Enhanced Engineering Plastics Excellence in Technology Award for 2008 to Stanyl® Super Flow. Frost & Sullivan is a global growth consulting company and partners with clients to accelerate their growth.
24 Apr 2008
蒂斯蔓工呈塑料推出全新的高性能STANYL®，應用于汽車底盤系統。
爲滿足汽車行業的需求，帝斯曼工程塑料推出Stanyl@Diablo OCD2100。該材料是Stanyl®新壹代首推産品，具有長期的耐熱穩定性，是壹項具有革命性的改進。該技術由DSM研發並獲取專利，其應用可以使零部件的使用壽命遠遠超過其它高溫尼龍産品的極限。可以抑制熱氧化變質，Stanyl®Diablo在230℃高溫下正常工作達3000多小時，同時其機械性能下降則不到15%。
24 Apr 2008
DSM launches Arnite® TV4 260SXF: a special UL94 V0 PBT grade
DSM Engineering Plastics launches Arnite® TV4 260SXF, a special grade meant to cater to the advanced needs of the electrical industry. This grade is specially targeted for thin walled insulating components such as relays and bobbins. Arnite TV4 260SXF is a special PBT grade which is UL94 V0 at 0.4mm and has a CTI rating of 300 V.
23 Apr 2008
DSM ARNITEL® C TPE FOR WIRE & CABLE OFFERS BEST HIGH-HEAT AGING PERFORMANCE, PLUS HALOGEN-FREE FLAME RETARDANCE
DSM Engineering Plastics has announced a new addition to its Arnitel® line of copolyester thermoplastic elastomers (TPEs) that is designed to meet the stringent performance and compliance needs of today’s automotive designers. Arnitel® C, a breakthrough technology for wire and cable coating, delivers the best high-heat aging performance of any TPE-E, combined with halogen-free flame retardance and hydrolysis resistance that surpasses that of other copolyester elastomers. Thanks to its excellent abrasion resistance, this new material offers designers the ability to reduce the weight and mass of wiring and cable through ultra-thin-wall coatings. In addition to automotive engine cables, Arnitel® C is ideal for other extrusion applications including cable harness components, convoluted tubes and hoses.
9 Apr 2008
STANYL® TAKES THE HEAT
Rosenbauer, the world leader in mobile fire protections and civil defence solutions, recently introduced “Heros-Xtreme”, a new fireman’s helmet, tested and approved according to EN 443:1997 and prEN 443:2006.
