29 May 2017
New TE Connectivity RJ45 Jacks with Integrated Magnetics Meet Industrial Requirements
DARMSTADT, Germany – May 29, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, has launched a new range of RJ45 jacks with integrated magnetics, specifically for industrial applications. TE’s standard portfolio includes 1x1 straight and R/A, 1x2, and 2x1 form factors, tab up and tab down, and jacks with and without LEDs. These new RJ45 jacks support voltage mode as well as current mode PHY chips, providing customers with solutions for almost every industrial Ethernet application, like programmable logic controllers (PLCs), motion controllers and high-end industrial computers.
23 May 2017
ALCOSWITCH Anti-Vandal Push-Button Switches from TE Connectivity for Reliability in Panel-Mount Applications
HARRISBURG, PA., USA – May 23, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, now offers several extensions to the ALCOSWITCH anti-vandal push-button switch range of products. These switches provide security and reliability in industrial machinery and building equipment. Through a jam nut accessible from the rear of the panel, these switches are designed to be installed in settings where they may be subject to abuse or attempts to cause damage to them.
22 May 2017
New Dust- and Waterproof Miniature Sealed Wire-to-Wire Connectors from TE Connectivity
HARRISBURG, PA., USA – May 22, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, has introduced the SlimSeal connector Miniature series, an IP67 sealed wire-to-wire connector. With the IP67 rating, these connectors are impervious to dust and are waterproof up to depths of one meter, making them suitable for outdoor lighting and other high-humidity applications. TE’s SlimSeal connector Miniature series feature a press-to-release spring latch that ensures secure mating. Available with two and three positions, these connectors have a space-saving compact design and pre-assembled seals to cut assembly time. The connectors come in four different colors (black, red, white and grey) to make identification and assembly easy.
18 May 2017
TE Connectivity Introduces Corcom IEC Inlet RFI Filters for Medical Equipment
HARRISBURG, PA., USA – May 18, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, has introduced the Corcom IEC inlet RFI filter IH series to suppress electromagnetic interference (EMI) conducted in equipment used in medical environments requiring C18 ungrounded inlets. These inlet RFI filters are also suitable for use in laboratory, test and measurement equipment.
10 May 2017
TE Connectivity Appoints Pius Arnold as Head of Sales for Intercontec Products
DARMSTADT, Germany – May 10, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, has announced the appointment of Pius Arnold as the new Head of Sales for its Intercontec product portfolio within TE's Automation & Control business.
9 May 2017
TE Connectivity Press Kit Lightfair International 2017
At Lightfair International (9-11 May) TE Connectivity (TE), a world leader in connectivity and sensors, is unveiling several innovations that increase efficiency in its customers’ development projects.
9 May 2017
TE Connectivity Unveils LUMAWISE Drive LED Holder Type Z50 for Customers’ Innovative Lighting Designs
HARRISBURG, PA., USA – May 9, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, is unveiling the LUMAWISE Drive LED holder Type Z50 for chip-on-board (COB) LEDs. The new LUMAWISE Drive LED holder Type Z50, used in track and spot lighting, integrates the holder and driver into a single package that offers lighting designers the possibility to develop compact, better-looking and more cost-effective lighting products. It will be a featured product at TE’s booth at LIGHTFAIR International (LFI) 2017, the world's largest annual architectural and commercial lighting trade show and conference, taking place in Philadelphia, PA., from May 9-11.
4 May 2017
TE Connectivity Merges Two Acquired Intercontec Legal Entities into TE Connectivity Industrial GmbH
DARMSTADT, Germany – May 4, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, announced today that Intercontec Produkt GmbH and motec Montage GmbH have merged into TE Connectivity Industrial GmbH.
3 May 2017
ZHD-SCE Heat Shrink Sleeves from TE Connectivity Enable Safe and Flexible Labeling
SWINDON, U.K. – May 3, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, is highlighting its ZHD-SCE low fire hazard and fluid resistant heat shrink sleeves designed for harsh environments. These ZHD–SCE sleeves can be used in a wide variety of applications–including rail, marine, motorsports and industrial–that require the highest performance from an identification sleeve, without compromising on safety or capability.
1 May 2017
TE Connectivity Introduces a New, Easy-to-Install Grounding Solution for Indoor Lighting
HARRISBURG, PA., USA – May 1, 2017 – TE Connectivity (TE), a world leader in connectivity and sensors, is introducing the Ground Clip cable assembly, a quick and reliable way to ground equipment in applications such as lighting fixtures, HVAC equipment and signage.
24 Apr 2017
TE Connectivity werkt samen met o.a. Shapeways en Fontys aan de toekomst
’S-HERTOGENBOSCH – 24 april 2017 – TE Connectivity (TE), een wereldleider in connectiviteit en sensoren werkt vanaf nu officieel samen met Shapeways, Fontys en twaalf andere bedrijven. Deze samenwerking ligt op het gebied van praktijkgericht onderzoek naar additive manufacturing/3D printing en adaptive robots. Om deze samenwerking te bekrachtigen, hebben Mark Maas van TE Connectivity, Maarten van Dijk van Shapeways en Hans Nederlof van het College van Bestuur van Fontys ook het convenant ondertekend.
20 Apr 2017
Studenten krijgen een ‘kijkje in de keuken’ bij de marketingafdeling van TE Connectivity
’S-HERTOGENBOSCH – 20 april 2017 – TE Connectivity (TE), een wereldleider in connectiviteit en sensoren, hield een workshop over marketing als bijdrage aan succes in een B2B omgeving. Op 12 april kwamen 70 studenten van de Fontys Economische Hogeschool Tilburg (FEHT) op bezoek. Tijdens deze workshop kwamen verschillende facetten van het doen van marketing voor een internationaal, technisch bedrijf aan bod. Dit paste perfect in het straatje van de leerlingen, deze jongeren zijn namelijk bezig met hun studie International Business and Languages en International Marketing and Management.
